What are the precautions for strip light glue?
Characteristics after curing: flexural strength 2.8~3.2kg/mm. The tensile strength is 2.4~3.6kg/mm. The hardness is 20~30SHORE D. The elongation rate is 320%. Water absorption rate at 25℃ for 24 hours <0.1%.
Precautions
● It is recommended to vacuum and defoam the glue after mixing this product. In order to eliminate the bubbles generated during the stirring process. Or let it stand for 10-20 minutes before use. So that the bubbles generated during mixing are broken in time.
● Such as heating and curing. The product with good glue can be allowed to stand for a period of time before entering the oven. If there are still bubbles on the surface, use flame defoaming method to remove bubbles.
● The more the amount of glue mixed together, the faster the reaction and the faster the curing speed. Please pay attention to control the amount of glue at one time. Because the reaction is quicker, the time it can be used is also shortened.
● The usable time refers to the time that the viscosity of 100g of mixed glue doubles under the condition of 25℃. After the operating time, the glue must not be used.
● A very small number of people will have mild skin allergies and mild itching after prolonged contact with glue. It is recommended to wear protective gloves when using. If it sticks to the skin, wipe it off with acetone or alcohol. And use detergent to clean it.
● Please try a small amount before using it in large quantities. Master the use skills of the product to avoid mistakes.
