How to maintain LED strip lights
Because the LED is an electrostatic sensitive component. If the anti-static measures are not taken care of during maintenance, the LED will be burned out, causing losses. It should be noted that the electric soldering iron should use an anti-static soldering iron. At the same time, maintenance personnel must also prepare anti-static measures. Such as wearing static rings and anti-static gloves.
The two main components of LED strips are LED and FPC. If the FPC is continuing the high temperature, it may exceed its acceptable measurement. It will cause the FPC cover film to crack and indirectly form the scrap of the LED light strip. At the same time, LEDs cannot continue to withstand high temperatures. The chip will be burned out by the high temperature for a long time under high temperature. Therefore, the electric soldering iron used when repairing the LED light strip is a temperature-controlled electric soldering iron. Limit the measurement to a certain range and prevent arbitrary changes and settings. In addition, please note that the soldering iron cannot stop at the LED pin for more than 10 seconds during maintenance. If it exceeds a certain time, it is very likely to burn the LED chip.
Many LED strips are not lit because there is a short circuit at the pin. It is necessary to investigate the real reason for the lack of light before maintenance. After rashly changing the LED that is not bright, it will continue to be broken down by the short-circuit direct current when the power is recycled again. You must first find the real reason for the lack of light, and then you can get half the result with half the effort.
